A. J. Wilkinson and T. B. Britton, Strains, planes, and EBSD in materials science, Mater. Today, vol.15, pp.366-376, 2012.

Z. Chen and S. H. Daly, Active Slip System Identification in Polycrystalline Metals by Digital Image Correlation (DIC), Exp. Mech, vol.57, pp.115-127, 2016.

J. Stinville, M. Echlin, D. Texier, F. Bridier, P. Bocher et al., Sub-Grain Scale Digital Image Correlation by Electron Microscopy for Polycrystalline Materials during Elastic and Plastic Deformation, Exp. Mech, vol.56, pp.197-216, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01644841

F. Roters, P. Eisenlohr, L. Hantcherli, D. D. Tjahjanto, T. R. Bieler et al., Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications, Acta Mater, vol.58, pp.1152-1211, 2010.

L. Signor, P. Villechaise, T. Ghidossi, E. Lacoste, M. Gueguen et al., Influence of local crystallographic configuration on microcrack initiation in fatigued 316LN stainless steel: Experiments and crystal plasticity finite elements simulations, Mater. Sci. Eng. A, vol.649, pp.239-249, 2016.

Y. Guan, B. Chen, J. Zou, T. B. Britton, J. Jiang et al., Crystal plasticity modelling and HR-DIC measurement of slip activation and strain localization in single and oligo-crystal Ni alloys under fatigue, Int. J. Plast, vol.88, pp.70-88, 2017.

A. Zeghadi, F. N'guyen, S. Forest, A. F. Gourgues, and O. Bouaziz, Ensemble averaging stress-strain fields in polycrystalline aggregates with a constrained surface microstructure-Part 1: Anisotropic elastic behavior, Philos. Mag, vol.87, pp.1401-1424, 2007.

M. P. Echlin, M. Straw, S. Randolph, J. Filevich, and T. M. Pollock, The TriBeam system: Femtosecond laser ablation in situ SEM, Mater. Charact, vol.100, pp.1-12, 2015.

H. F. Poulsen, An introduction to three-dimensional X-ray diffraction microscopy, J. Appl. Crystallogr, vol.45, pp.1084-1097, 2012.

A. Borbély and A. R. Kaysser-pyzalla, X-ray diffraction microscopy: Emerging imaging techniques for nondestructive analysis of crystalline materials from the millimetre down to the nanometre scale, J. Appl. Crystallogr, vol.46, pp.295-296, 2013.

W. Ludwig, A. King, P. Reischig, M. Herbig, E. Lauridsen et al., New opportunities for 3D materials science of polycrystalline materials at the micrometre lengthscale by combined use of X-ray diffraction and X-ray imaging, Mater. Sci. Eng. A, vol.524, pp.69-76, 2009.
URL : https://hal.archives-ouvertes.fr/hal-00423791

W. Ludwig, A. King, M. Herbig, P. Reischig, J. Marrow et al., Characterization of Polycrystalline Materials Using Synchrotron X-ray Imaging and Diffraction Techniques, JOM, vol.62, pp.22-28, 2010.
URL : https://hal.archives-ouvertes.fr/hal-00534470

N. Viganò, A. Tanguy, S. Hallais, A. Dimanov, M. Bornert et al., Three-dimensional full-field X-ray orientation microscopy, Sci. Rep, 2016.

J. C. Schuren, P. A. Shade, J. V. Bernier, S. F. Li, B. Blank et al., New opportunities for quantitative tracking of polycrystal responses in three dimensions, Curr. Opin. Solid State Mater. Sci, vol.19, pp.235-244, 2015.

N. Guéninchault, H. Proudhon, and W. Ludwig, Nanox, a miniature mechanical stress rig designed for near-field X-ray diffraction imaging techniques, J. Synchrotron Radiat, vol.23, pp.1474-1483, 2016.

D. M. Turner and S. R. Kalidindi, Statistical construction of 3-D microstructures from 2-D exemplars collected on oblique sections, Acta Mater, vol.102, pp.136-148, 2016.

H. Proudhon, J. Li, P. Reischig, N. Guéninchault, S. Forest et al., Coupling Diffraction Contrast Tomography with the Finite Element Method, Adv. Eng. Mater, vol.18, pp.903-912, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01337825

D. L. Mcdowell and F. P. Dunne, Microstructure-sensitive computational modeling of fatigue crack formation, Int. J. Fatigue, vol.32, pp.1521-1542, 2010.

M. P. Miller and P. R. Dawson, Understanding local deformation in metallic polycrystals using high energy X-rays and finite elements, Curr. Opin. Solid State Mater. Sci, vol.18, pp.286-299, 2014.

T. Erinosho, D. Collins, A. Wilkinson, R. Todd, and F. Dunne, Assessment of X-ray diffraction and crystal plasticity lattice strain evolutions under biaxial loading, Int. J. Plast, vol.83, pp.1-18, 2016.

A. Guery, F. Hild, F. Latourte, and S. Roux, Identification of crystal plasticity parameters using DIC measurements and weighted FEMU, Mech. Mater, vol.100, pp.55-71, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01383934

Y. Brechet and F. Livet, Low cycle fatigue of binary Al-Li alloys: III-coalescenceof ?' precipitates in fatigue: X-ray low angle scattering investigation, J. Phys. Colloq, vol.48, 1987.

G. B. Vaughan, J. P. Wright, A. Bytchkov, M. Rossat, H. Gleyzolle et al., X-ray transfocators: Focusing devices based on compound refractive lenses, J. Synchrotron Radiat, vol.18, pp.125-133, 2011.

W. Ludwig, P. Cloetens, J. Härtwig, J. Baruchel, B. Hamelin et al., Three-dimensional imaging of crystal defects by 'topo-tomography, J. Appl. Crystallogr, vol.34, pp.602-607, 2001.

W. Ludwig, E. M. Lauridsen, S. Schmidt, H. F. Poulsen, and J. Baruchel, High-resolution three-dimensional mapping of individual grains in polycrystals by topotomography, J. Appl. Crystallogr, vol.40, pp.905-911, 2007.
URL : https://hal.archives-ouvertes.fr/hal-00434189

W. R. Busing and H. A. Levy, Angle calculations for 3-and 4-circle X-ray and neutron diffractometers, Acta Crystallogr, vol.22, pp.457-464, 1967.

H. F. Poulsen, Three-Dimensional X-Ray Diffraction Microscopy-Mapping Polycrystals and Their Dynamics

, Springer Tracts in Modern Physics, vol.205, 2004.

D. Rowenhorst, A. D. Rollett, G. S. Rohrer, M. Groeber, M. Jackson et al., Consistent representations of and conversions between 3D rotations, Model. Simul. Mater. Sci. Eng, vol.23, p.83501, 2015.

J. Besson, G. Cailletaud, J. L. Chaboche, S. Forest, and M. Blétry, Non-Linear Mechanics of Materials

J. Mandel, Equations constitutives et directeurs dans les milieux plastiques et viscoplastiques, Int. J. Solids Struct, vol.9, pp.725-740, 1973.

J. Besson and R. Foerch, Large scale object-oriented finite element code design, Comput. Methods Appl. Mech. Eng, vol.142, pp.165-187, 1997.

L. Meric, P. Poubanne, and G. Cailletaud, Single Crystal Modeling for Structural Calculations: Part 1-Model Presentation, J. Eng. Mater. Technol, vol.113, pp.162-170, 1991.

P. Franciosi, M. Berveiller, and A. Zaoui, Latent hardening in copper and aluminum single crystals, Acta Metall, vol.28, pp.273-283, 1980.

T. Y. Wu, J. L. Bassani, and C. Laird, Latent hardening in single crystals-I. Theory and experiments, Proc. R. Soc. Lond. A, vol.435, pp.1-19, 1991.

A. Marchenko, M. Mazière, S. Forest, and J. L. Strudel, Crystal plasticity simulation of strain aging phenomena in ?-titanium at room temperature, Int. J. Plast, vol.85, pp.1-33, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01358092

L. Tabourot, M. Fivel, and E. Rauch, Generalised constitutive laws for f.c.c. single crystals, Mater. Sci. Eng. A, pp.639-642, 1997.

E. Héripré, M. Dexet, J. Crépin, L. Gélébart, A. Roos et al., Coupling between experimental measurements and polycrystal finite element calculations for micromechanical study of metallic materials, Int. J. Plast, vol.23, pp.1512-1539, 2007.

, Pymicro: A Python Package to Work with Material Microstructures and 3D Data Sets, p.15, 2018.

Q. Shi, F. Latourte, F. Hild, and S. Roux, Backtracking Depth-Resolved Microstructures for Crystal Plasticity Identification-Part 2: Identification, vol.69, pp.2803-2809, 2017.
URL : https://hal.archives-ouvertes.fr/hal-01674541

R. I. Barabash and P. Klimanek, X-ray scattering by crystals with local lattice rotation fields, J. Appl. Crystallogr, vol.32, pp.1050-1059, 1999.

W. Pantleon, C. Wejdemann, B. Jakobsen, U. Lienert, and H. Poulsen, Evolution of deformation structures under varying loading conditions followed in situ by high angular resolution 3DXRD, Mater. Sci. Eng. A, vol.524, pp.55-63, 2009.

A. Borbély and T. Ungár, X-ray line profiles analysis of plastically deformed metals, C. R. Phys, vol.13, pp.293-306, 2012.